New Hemp Regulations Set to Begin November 1 in Wisconsin
MADISON, WI (SPECTRUM NEWS) — Hemp groups like the National Industrial Hemp Council are celebrating the passage of a spending bill passed Tuesday to avoid a U.S. government shutdown. The NIHC said the bill includes a provision to extend Hemp Pilot programs in states for another year — delaying the need for states to comply with federal guidelines on hemp until fall of 2021.
вЂњWith the SenateвЂ™s vote today, hemp farmers across the country will have more certainty tomorrow while states continue their important work to submit final plans to the USDA for approval,” said Patrick Atagi, NIHC board chairman in a press release.
The Wisconsin Department of Agriculture, Trade and Consumer Protection is evaluating exactly what the passage means for the state’s hemp rules and regulations.
“DATCP is aware of this that just passed yesterday. We are evaluating the impact this has on the transition already in progress for a new state hemp plan and we are working to determine whether this will change the October 31 end date for the pilot program in Wisconsin,” said Leeann Duwe, a spokesperson with DATCP.
MADISON, Wis. вЂ” Changes to regulations on growing and processing hemp will be coming at the end of October.
The current Hemp Pilot Program for the state will sunset on October 31 and the Wisconsin Department of Agriculture, Trade and Consumer Protection has submitted new rules to the U.S. Department of Agriculture to comply with federal regulations.
There will be new licensing rules as well as a change to the sample testing process for hemp to check THC levels вЂ” the part of marijuana that causes a high.
вЂњWhat the THC level has to test at or below isn’t changing,вЂќ said Leeann Duwe, a spokesperson with DATCP. вЂњThere’s a range now.вЂќ
The THC threshold will remain at .3 percent. However, starting November 1st, there will be a lab calculated margin of error on the tests and .3 needs to be within that. Before any test that came back between .3 and .4 would be rounded down.
For example, if a test comes back with .39 percent THC, it would have passed the previous test. Now if it comes back with .39 percent THC and a .06 margin of error, the test would not pass because .3 is not within the margin of error and the field would have to be destroyed.
The new rules have been submitted to the USDA for final approval, DATCP expects the approval to come early in October. They have more information on the state’s hemp program and resources for hemp farmers online.
Jay Selthofner, farmer and owner of Heritage Hemp Farms in Green Lake, Wisconsin, said the new rules wouldn’t impact him much.
вЂњEh we’ll keep going with it because I mean it just makes sense,вЂќ he said. вЂњIn any industry, you’re going to have to navigate regulatory challenges and if you cannot navigate those you probably shouldn’t be in that business, so I mean it’s just part of doing business.вЂќ
Selthofner said many people in the Hemp industry are more concerned with a Drug Enforcement Administration ruling that if the product of tests above .3 THC anywhere along the processing process it is considered a controlled substance.
Selthofner said many companies remove THC from CBD products in processing and have substances with high concentrations of THC as a result. Selthofner said that could put some processors out of business.
вЂњWhen the industry stakeholders read the DEA interpretation of that rule, they don’t like it because it leaves the door open,вЂќ he said.
The Hemp Industries Association filed a suit over the rule in federal court.
вЂњThe DEAвЂ™s interim final rule could create substantial barriers to the legal manufacturing of hemp-derived products, a critical component of the hemp supply chain, and devastate the entire hemp industry,вЂќ said Rick Trojan, HIA President in a statement. вЂњAlthough the DEA states that is not its intention, the rule must be amended to ensure hemp remains an agricultural crop, as Congress intended.”
Selthofner said many farmers will be able to do things like grow THC-free strains of hemp plants. He said changing regulations is normal for people in the hemp industry.
вЂњIt’s a moving target and you just get good with your aim,вЂќ Selthofner said.
So far this year 1,480 samples have been turned in for testing to DATCP, about 10 percent of them tested too high for THC. Last year 2,200 samples were turned in for testing and about 12 percent of them tested too high.
Duwe said the testing numbers are down so far this fall. She said last year they were getting 100 requests a day, but this year they have been receiving about 300 per week.
She farmers have been citing coronavirus as a reason for the test requests being down, but DATCP isn’t exactly sure how the pandemic has been impacting hemp farmers. The department had increased it’s testing staff and geographical footprint of testers for this year’s hemp harvest.
Anyone growing this year should get their plants tested by November 1st and the new regulations, Duwe said.
вЂњJust because with the pilot program sunsetting at the end of October we want to encourage growers to get their samples in and harvested before the new program starts on November first,вЂќ Duwe said.
A public comment period on the new federal hemp regulations is open until October 8.
New rules could narrow THC testing guidelines, suit filed over DEA regulations.
Division of Extension
Home » Wisconsin Industrial Hemp Production: A basic FAQ guide for growing an old crop in a new era
Wisconsin Industrial Hemp Production: A basic FAQ guide for growing an old crop in a new era
This article was first published on Dr. Shawn Conley’s Cool Bean website on February 7, 2018. It has been archived here for your convenience.
Authors: Shawn P. Conley, John Gaska, Adam Roth, Cheryl Skjolaas, Erin Silva, Loretta Ortiz-Ribbing, William Barker, and Patrick Robinson
Wisconsin growers will be able to grow and process industrial hemp under 2017 Wisconsin Act 100, a law recently passed by the Legislature and signed by the Governor. The law directs the Wisconsin Department of Agriculture, Trade and Consumer Protection (DATCP) to write an emergency administrative rule that will spell out the details of the program, including requirements for growers.
This document will be updated as new information becomes available. The emergency rule will remain in effect until July 2020 or until a permanent administrative rule is approved. Please consult the official DATCP and State of Wisconsin websites for official information.
Questions that likely will be addressed by the emergency rule are noted here.
Only official rules, regulations, and notices as posted by the DATCP and State of Wisconsin can be used. Official information from the DATCP and the State of Wisconsin supersedes any information contained here.
If you are interested in receiving email updates from DATCP, please subscribe here!
Please click for more information on the Industrial Hemp Research Pilot Program
It is unclear whether there will be a legal mechanism to get hemp seed into Wisconsin in time to plant the 2018 growing season. The Drug Enforcement Administration (DEA) will likely require a DEA Import license for any seed coming from outside Wisconsin. Anyone planting before a license is issued is most likely taking a significant risk.
What is industrial hemp?
As defined in s.94.55 (1) Wis. Stats. “industrial hemp” means the plant Cannabis sativa L., or any part of the plant including seeds, having a Delta-9-Tetrahydrocannabinol (THC) concentration of 0.3% or less, although this allowable percentage may be raised up to a maximum concentration of 1% THC if in the future federal law allows a higher percentage. The statute includes the definition a substance, material, or product that is not designated as a controlled substance under the state Uniform Controlled Substances Act, or the federal Controlled Substances Act, or both.
Industrial hemp is classified as non-drug Cannabis sativa varieties, whose fruit is technically an achene, or a single-seeded fruit similar to a sunflower. Both the seed and hemp’s tall stalk provide significant carbohydrate feedstocks for a wide variety of industrial purposes that are used in several countries. The oil pressed from hempseed in particular, is a rich source of polyunsaturated omega-3 and omega-6 fatty acids, which are essential for human health. These same fatty acids in hempseed oil make it a fine drying oil that is used in the production of paints, varnishes, and other coating materials. Plastic flooring such as linoleum and similar materials have been made from hempseed oil, and other non-food uses of hempseed oil are similar to those of linseed oil (flaxseed oil).
The State of Wisconsin Industrial Hemp Program
Wisconsin Department of Agriculture Trade & Consumer Protection (DATCP) will promulgate rules establishing an industrial hemp program. The State of WI industrial hemp program must generally maximize opportunity for a person to plant, grow, cultivate, harvest, sample, test, process, transport, transfer, take possession of, sell, import, and export industrial hemp to the greatest extent authorized under federal law.
The authorizing legislation requires DATCP to do the following:
- Ensure the quality of industrial hemp grown or processed in this state, the security of activities related to industrial hemp, and the safety of products produced from industrial hemp, including any necessary testing.
- Verify adherence to laws and rules governing activities related to industrial hemp.
- Enforce violations of laws and rules.
- Require an initial fee from any person who plants, grows, or cultivates industrial hemp equal to the greater of $150 or $5 multiplied by the number of acres used to plant, grow, or cultivate industrial hemp, but not to exceed $1,000. An annual fee may also be imposed on any person whose industrial hemp activities are regulated by DATCP. This annual fee may not exceed an amount sufficient to cover DATCP costs to regulate those activities.
- Ensure that certain information in its possession is confidential, except that this information must be made available to a law enforcement agency or law enforcement officer.
DATCP is required to create a pilot program to study the growth, cultivation, and marketing of industrial hemp. The Act requires DATCP to issue licenses that authorize the planting, growing, cultivating, harvesting, sampling, testing, processing, transporting, transferring, taking possession, selling, importing, and exporting of industrial hemp. Such licenses do not expire unless the pilot program expires or the license is revoked.
Further questions that may be addressed by the new rule are:
- How do I apply to grow hemp?
- How long is my pilot production license good for?
- Am I required to do anything else if I participate in the pilot program?
- How do you know my field’s THC content?
- What if my plants test above the acceptable 0.3% delta-9 threshold?
- How does growing hemp affect my FSA and/or federal crop insurance contracts or program participation?
- Can I grow hemp inside a greenhouse?
- Can I see a list of hemp growers or hemp processors licensed in the state?
- Do I need to notify the sheriff/local police?
- Do I need to build a fence or put up signs around my field?
- Can I grow hemp near a school, a town, or a major road? Are there restrictions on where I can grow it?
- Do I need a license to process hemp?
Besides work done in the early 20th century, there is little information on growing hemp in Wisconsin that is based on local research. The following information is gleaned from these references:
When do you plant hemp?
Based on work done in neighboring states, planting done from mid-May to late-June resulted in highest yields with lower risk of frost injury.
What is the seeding rate?
General seeding recommendations is between 20-40 lbs per acre for grain production, and 40-60 lbs per acre for fiber production. A lot of factors go into determining the optimal seeding rate for your field, including the variety, seed purity and germ, local conditions, etc.
The end use of your hemp crop will dictate the seeding rate. When growing hemp for fiber only production, it is suggested the seeding rate should be double what is used for grain production. The reason for higher seeding rates is to ensure a higher quality fiber crop. Good quality hemp fiber comes from plants that are “pencil thin”. Higher seeding rates will ensure that there will be a high plant population with tall thin plants with longer internodes. Research is limited in Canada to determine proper seeding rates to achieve high yielding and good quality fiber. Low plant populations will not provide competition for early weed control. Hemp can have a high mortality rate under adverse growing conditions. Research has shown that 10% to 70% seed mortality can occur under varied climatic conditions. Based on observations, reasons for high mortality are generally attributed to:
- Poor growing conditions at seeding
- Seeding too deep
- Cracking of the seed coat
- Toxicity from high rates of seed placed fertilizer
- Residual herbicides from previous crop
What are some seeding recommendations?
Most conventional drills and seeders will work for hemp. To enhance hemp plant stands:
- Seed into warm soil
- Seed into a firm seedbed with good soil to seed contact
- Seed shallow, 1.25 cm (0.5 inches) to on 2.5 cm (1 inch) maximum
- Do not seed deep into moisture in a dry year. In spite of being a moderately large seed, hemp will struggle to emerge from deep seeding
- Avoid seeding before an abundance of precipitation is anticipated. Seed after a heavy rain rather than before
- Although most seeding equipment will work for hemp it is important to monitor seeder output to avoid seed cracking. Cracking occurs in the manifolds when air volume is too high
- Take into account germination rate. A common percentage of 70% germination is often used when calculating seeding rates. If spring seeding conditions are ideal this rate can be lowered
- Avoid compaction from wheel tracks or other soil compaction, as with other crops, will show up under certain conditions
- Avoid excessive trash that can keep soils cool and could cause hair pinning with disc drills
Can you plant hemp on hemp? How does it fit into a crop rotation?
According to the Canadian Hemp Trade Alliance (CHTA) “hemp fits in with typical crop rotation systems and with typical equipment that would already be found in a grain production system.”
Can I grow hemp organically?
Yes. On August 23, 2016, the National Organic Program (NOP) released this statement: “For hemp produced in the United States, only industrial hemp, produced in accordance with the 2014 Farm Bill, as articulated in the Statement of Principles on Industrial Hemp issued on August 12, 2016 by USDA, may be certified as organic, if produced in accordance with USDA organic regulations.” Some certification agencies will allow industrial hemp to be included in an organic rotation, so long as the growers are properly licensed under a pilot program. However, some certifiers may be taking a more hesitant approach, since there are many questions yet to be answered. Thus, farmers should talk to their certifier before making the decision to include this crop within their organic rotation. If growing industrial hemp, organic farmers will be required to do an organic seed search before using nonorganic seed.
Use practical organic farming practices such as a perennial clover or green manure plow down, with added manure to increase nutrient availability for rapid initial growth. Reduce any weed pressure by plowing and harrowing prior to sowing. The seedbed must be as fine and even as possible. Good soil, farming experience and proper nutrient levels are essential for successful organic oilseed hemp production.
Do you need to fertilize hemp?
Hemp has similar nutrient needs as canola and especially requires added nitrogen. Fertilize like rapeseed (Canola- Brassica napus) with 15% additional nitrogen. Conventional NPKS (nitrogen, phosphorus, potassium and sulfur) fertilization is recommended at the same levels required to grow rapeseed. Apply additional K and S wherever soils are deficient in these elements.
How/When do you harvest it?
Hemp can be grown for seed or fiber. Hemp grain harvesting is generally done by straight combining, however swathing is also used. Newer models of combines are best suited to handling hemp harvest and require minimal modifications. The new machines have bigger cylinders and cleaning area. In addition, newer combines can operate with headers at higher levels so all stands of hemp can be accommodated. Most new combines are now rotary design. Some new machines have the swath entering at the bottom of the cylinder. The draper header is preferred by growers.
The top third of the crop may be combined for grain while the plants are still “green” (70-90% seed head maturity). Harvesting while the crop is partially green will help minimize cutting and wrapping problems. The main disadvantage at harvest is plugging the combine with stems and other moist vegetative material. Dry field conditions are essential for a good harvest. However, a dead and desiccated crop will be more difficult to cut, more prone to wrapping and subsequent fire hazard. Grain moisture should be at least 10-15% at the time of harvest.
What kind of yield can I expect?
Yields can vary widely depending on the variety, local climatic conditions, cultivation method, and grower experience. For grain, new growers have reported yields between 250-700 lbs/acre. More experienced growers can expect between 800- 1,800+ lbs/acre. For fiber, the average yield for dual purpose crops (those varieties which are harvested for grain and fiber) is 0.75-2 tons/acre. For hemp produced solely for fiber, the average yield is between 3-5 tons per acre.
How deep are the roots?
Hemp has a large root capable of penetrating deep in the soil profile to recover nutrients that may be lost to many other crops, up to the 24-inch level.
What are some weed management strategies?
Given a good start, hemp can be an effective weed suppressant. Currently, there are no registered herbicides for weed control in hemp. A quick, even emergence is the key to effectively compete with weeds, by rapidly creating a dense leaf canopy within the first month of growth. Hemp will self thin to an optimal density, and it is better to have this crop compete with itself, rather than weeds. It is recommended to minimize weed pressure in the previous year and start with spring tilling and harrowing. Perennial forages or green manure plow downs are good preceding crops. Problem weeds may include wild buckwheat, wild oat, Amaranthus species, Chenopodium species, rapeseed, and other volunteer crops.
Where can I buy hemp seed from?
The Act requires DATCP to establish and administer an industrial hemp seed certification program, or designate a member of the Association of Official Seed Certifying Agencies or a successor organization to administer a seed certification program. This seed certification
program must include the testing and certification of THC concentrations in hemp plants. Participation in the certification program must be voluntary for growers and cultivators of industrial hemp. The Act also authorizes DATCP to seek federal approval to serve as an importer of industrial hemp seed. Importing seeds into Wisconsin to begin the hemp program may require permission from the U.S. DEA, which could affect the time when production can begin.
Other seed-related questions that may be addressed by the rules are:
- Can I save seed for planting the following year?
- Do I need a seed permit to sell hemp seed in Wisconsin?
- Can I breed a new variety of hemp for Wisconsin?
Do I need a grain buyer’s license to buy hemp grain?
Yes, if you are buying hemp grain with the purpose of reselling the grain or products made from the grain. In addition to a license, a bond must be acquired.
- Hemp is sold as a raw food so avoiding contamination is extremely important.
- All harvest related equipment should be cleaned out prior to harvest to ensure no contamination occurs from other crop types that are difficult to clean out of hemp.
- Combine divergent crops like canola or soybeans before combining hemp. This cleans out the combine and these crops are easily removed if contamination occurs.
- Clean grain as soon as possible to maintain grain quality and ensure safe storage. Inspect trucks for cleanliness before loading clean grain that is destined for the processor.
- For maximum shelf life, grain should be stored in a clean, dry location. Storage temperatures in excess of 75° Fahrenheit for a sustained period of time may cause rancidity and separation of the soluble and insoluble proteins.
- Hemp is combined at a moisture content of 10 to 20% moisture. The majority of the moisture comes from broken plant material, immature seeds and seeds enclosed in bracts. Dockage will range from 10 to 20%. The wetter the sample, the more urgent the drying process is. Drying should begin within hours of harvest. Heated air grain dryers and aeration can be used for drying the seed down
- The industry has accepted 10% moisture as dry. A safer level is 8 or 9%. Percent moisture requirement should be checked with contractor.
- Hemp grain generally has a lot of bracts and broken plant parts that are higher in moisture than the grain. Once drying begins these plant parts dry quickly and the speed at which the grain dries also increases at the end of the drying cycle.
- Monitor grain dryer temperatures to ensure the seed and seed oil quality is not compromised. Overheating the seed can cause the seed to turn yellow and discount the oil quality.
- Use grain drying when seed moisture is over 13 or 14%
- Monitor the dryer operation closely. Batch and continuous flow dryers are the most commonly used. Augers should be run full and slow to prevent cracking of the grain.
- Use heat of 150 to 160 degrees F for the first ½ of the drying period and then use 120 to 130 degrees to finish off the drying.
- Cleaning is required to remove contaminants such as weed seeds, plant parts and insects and it should be conducted as soon as possible after harvest. More importantly, cleaning removes cracked seeds resulting from combining.
- When cracked seeds are exposed to the air it causes oxidized rancidity of the oil which will contaminate the other seeds in the seed lot. This gives the hemp seed an undesirable taste and shortens the shelf life.
Economics and Marketing
Further marketing information can be found at:
Alberta Agriculture and Forestry
Who will buy my hemp if I grow it?
The market is limited and constantly in flux for hemp in the U.S. due to many different factors. We encourage interested individuals to contact a hemp trade association to learn more about marketing opportunities.
How much can I sell my hemp for?
Prices for hemp grain are widely fluctuating in the U.S. specifically due to the infancy and constant development of the industry. According to the Alberta Agriculture and Forestry Department, the average hemp grain price in 2015 in Alberta was $0.74 per pound. Typical returns for hemp grain in the U.S. have been between $0.40-0.70 per pound for conventional, and $0.75-1.00 per pound for organic. Due to the volatile nature of the current U.S. hemp industry, growers are advised to secure a contract before they plant.
What is the cost per acre?
The Alberta Agriculture and Forestry Department reported an average total production cost for hemp seed grown on dryland in 2015 at $409 per acre. With an average grain yield of 1,074 pounds per acre, that amounted to $0.38 per pound of hemp seed produced.
In Minnesota, hemp seed prices are widely variable based on the variety and the source. Imported seed has additional shipping and customs fees above and beyond domestically produced seed. Farmers should also consider the possibility of needing to buy or rent new harvesting equipment if they grow hemp. In 2016, hemp producers in Minnesota reported costs per acre between $970-$2,500 per acre. In 2017, initial reports indicate production costs of between $300-$600 per acre (does not include land cost).
Other questions that may be addressed by the new rules:
- Who will process my hemp in WI?
- Where are processors located in WI?
- Can I export hemp product to other countries?
- Can I sell grain or fiber to other states?
- Can I sell seed to other states?
- Are there any grants that I can get?
- Can I grow hemp under contract with someone else?
Can I feed hemp to my livestock?
Hemp is not currently an approved ingredient for commercial animal feed. Therefore, hemp material cannot be sold as animal feed.
Other sources of information
Wisconsin Hemp 101: Educational Seminar
Date: Jan 30, 2018 6:30PM
Venue: Chippewa Valley Technical College – Eau Claire
This article was first published on Dr. Shawn Conley's Cool Bean website on February 7, 2018. It has been archived here for your convenience. Autho